AirMini Travel Hard Case The AirMini™ Hard Travel Case by ResMed is a hard case for the AirMini™ travel CPAP machine. Made from impact absorbing EVA foam material, the AirMini™ Hard Travel Case is lightweight, water resistant and more! See below for more features: Impact Resistant Material for Travel Protection AirMini™ Hard Case uses EVA foam to snugly fit around the AirMini™ to assist in absorbing impact. Liquid Resistant for Additional Shielding The water and liquid resistant case help to keep the AirMini™ portable CPAP machine clean while enclosed. Easy to Handle for Convenience The AirMini™ Hard Travel Case offers a light and portable protective shell. It is designed with an easy-to-open zipper compartment.

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

Airfit F20 Frame SYS (M) The AirFit™ F20 Full Face CPAP Mask Assembly Kit is a refresh kit created to easily replace mask components to ensure the mask is clean and provides effective sleep apnea therapy. This assembly kit includes the AirFit F20 Mask Frame, Quick-Release Elbow, and AirFit F20 Full Face Cushion. This product does NOT include headgear. Multiple Sizes for the Best Possible Fit This AirFit™F20 Full Face Mask Assembly Kit is available in three sizes to provide the best fit possible. Available sizes include Small, Standard, and Large. Adaptive Cushion provides a Soft and Reliable Seal AirFit™ F20 Full Face CPAP Mask uses InfinitySeal™ technology to adapt and conform to the user’s face while providing a soft and comfortable feel. The InfinitySeal cushion uses various levels of thickness to allow the cushion to provide the right amount of pressure at the right places. Open Line of Vision with Below the Eyes Padded Frame The mask frame of the AirFit™ F20 Full Face Mask sits below the eye-line to provide an open line of vision. The AirFit F20 frame is added and flexible which allows the frame to conform to the users facial features nd flex with various sleeping positions. Quick-Release Elbow for Fast Tubing Removal Take the elbow and short tube off the AirFit™ F20 Full Face Mask with a squeeze on the Quick-Release elbow. Re-attach the tubing by slipping the Quick-Release Elbow with the tubing onto the mask until you hear a click. This product DOES NOT include Headgear. Headgear can be purchased through customization of the AirFit™ F20 Headgear or with the AirFit™ F20 Full Face CPAP Mask with Headgear.

Full face mask AirFit F20 Specially-designed to fit all patients, regardless of facial profile Designed to perform across a wide range of therapy pressures Modular frame fits all cushion sizes InfinitySeal cushion technology After more than 25 years of ResMed masks featuring dual-wall cushion technology, we’re excited to introduce InfinitySeal™ cushion technology. This new cushion features specially-designed “infinity” loops and varying thickness levels designed to reduce blowout and provide support at the sides of the nose. QuietAir vent technology QuietAir™ is our innovative diffuser vent technology within the mask elbow that makes the AirFit F20 89% quieter and 70% gentler than before. Featuring small multi-directional openings over a widespread area, QuietAir breaks up exhaled air so that it’s spread out lightly. Streamlined setups Equipped with an innovative new cushion and a variety of design enhancements, the AirFit F20 is our most technologically advanced full face mask ever. And with its modular design, each size cushion can easily be clicked into the standard AirFit F20 mask frame, helping streamline patient setups. F20 Airmini Set Up Pack The AirMini™ Mask Setup Pack by ResMed is designed to connect your AirFit™ F20 Full Face Mask to the AirMini™ Travel CPAP Machine. AirMini™ F20 Setup Pack for AirFit™ F20 Full Face CPAP Mask The AirMini™ F20 Setup Pack connects the AirFit™ F20 Full Face CPAP Mask to the AirMini™ Travel CPAP Machine. This pack includes a mask connector and tubing. HumidX™ waterless humidifier is not compatible with the F20 and is not included.

Full face mask AirFit F20 Specially-designed to fit all patients, regardless of facial profile Designed to perform across a wide range of therapy pressures Modular frame fits all cushion sizes InfinitySeal cushion technology After more than 25 years of ResMed masks featuring dual-wall cushion technology, we’re excited to introduce InfinitySeal™ cushion technology. This new cushion features specially-designed “infinity” loops and varying thickness levels designed to reduce blowout and provide support at the sides of the nose. QuietAir vent technology QuietAir™ is our innovative diffuser vent technology within the mask elbow that makes the AirFit F20 89% quieter and 70% gentler than before. Featuring small multi-directional openings over a widespread area, QuietAir breaks up exhaled air so that it’s spread out lightly. Streamlined setups Equipped with an innovative new cushion and a variety of design enhancements, the AirFit F20 is our most technologically advanced full face mask ever. And with its modular design, each size cushion can easily be clicked into the standard AirFit F20 mask frame, helping streamline patient setups.

LumisTM 150 VPAP ST non-invasive ventilator Lumis 150 ST is a non invasive ventilator designed for non dependent patients with respiratory insufficiency. Featuring ResMed's unique volume assurance mode - iVAPS (intelligent Volume Assured Pressure Support) - Lumis 150 VPAP ST maintains target alveolar ventilation to suit each patient's changing needs. Optional AutoEPAP ensures adequate EPAP is delivered to maintain an open upper airway - automatically, while an intelligent Backup Rate (iBR) encourages spontaneous breathing. Lumis 150 ST is also easy to set up and use. LumisTM 150 VPAP STKey Features - iVAPS intelligent Backup Rate (iBR) AutoEPAP maintains upper airway patency Vsync TiControl 5 Trigger and Cycle Senstivities QuickNav for low touch therapy adjustments Climate Control Auto for automatic humidification Ramp and Rampdown for extra comfort. supported by ResScan 5.4

AirCurve 10 V Auto The AirCurve 10 VAuto is an auto-adjusting bilevel machine that uses the comfort of both the AutoSet™ algorithm and Easy-Breathe waveform in its VAuto algorithm to treat obstructive sleep apnea patients who can benefit from greater pressure support. The AirCurve 10 VAuto adjusts the baseline pressure to hold the airway open while maintaining a fixed pressure support. Easy-Breathe technology The Easy-Breathe pressure waveform mimics the wave shape of normal breathing and replicates it for your breathing comfort. Climate Control Every device comes with the new HumidAir™ heated humidifier built-in, so you can enjoy the benefits of humidification in one easy-to-use system. And when used with the ClimateLineAir™ heated tube, your device has been designed to automatically deliver the optimal temperature and humidity, for a more comfortable therapy experience. Other features Continuous leak management enables reliable delivery of therapy pressure while maintaining patient-device synchrony. Compatible with up to 15 L/min of supplemental oxygen in S and CPAP mode and 4 L/min in VAuto mode. Consistent humidification throughout the night with the integrated HumidAir™ humidifier and optional ClimateLineAir™ heated tube with Climate Control technology can provide a more comfortable experience. The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner. The built-in ambient light sensor adjusts to the brightness of the room. So if you need to get up during the night, the screen’s back light won’t disrupt your bed partner. The light also turns off automatically, so you can settle back to sleep without disturbance.