LumisTM 150 VPAP ST non-invasive ventilator Lumis 150 ST is a non invasive ventilator designed for non dependent patients with respiratory insufficiency. Featuring ResMed's unique volume assurance mode - iVAPS (intelligent Volume Assured Pressure Support) - Lumis 150 VPAP ST maintains target alveolar ventilation to suit each patient's changing needs. Optional AutoEPAP ensures adequate EPAP is delivered to maintain an open upper airway - automatically, while an intelligent Backup Rate (iBR) encourages spontaneous breathing. Lumis 150 ST is also easy to set up and use. LumisTM 150 VPAP STKey Features - iVAPS intelligent Backup Rate (iBR) AutoEPAP maintains upper airway patency Vsync TiControl 5 Trigger and Cycle Senstivities QuickNav for low touch therapy adjustments Climate Control Auto for automatic humidification Ramp and Rampdown for extra comfort. supported by ResScan 5.4

Stellar 150 non-invasive ventilator Stellar 150 is ResMed's premium non invasive ventilator (with invasive capabilities) for patients with changing ventilatory needs or progressive respiratory conditions, including chronic obstructive pulmonary disease (COPD), neuromuscular disease (NMD) and obesity hypoventilation syndrome (OHS). Easy to set up and use, Stellar 150 carefully strikes a balance between providing clinicians with pre programmed settings that make their job easier, and the opportunity to fine-tune settings when needed to suit each individual patient - a versatile system with its end user in mind. With intelligent backup rate and optional AutoEPAP feature, iVAPS in Stellar 150 continuously monitors ventilation and the upper airway and automatically adjusts to deliver personalised ventilation that accomodates each patient's changing needs Key Features - iVAPS AutoEPAP maintains upper airway patency intelligent Backup Rate (iBR) Pathology defaults for obstructive, restrictive, obesity hypoventilation and normal lung mechanics Invasive and non invasive, adult to peadiatric usage In built battery back up upto 2 hours 2 customizable pre set programs Vsync TiControl 5 Trigger and Cycle Senstivities Oxygen delivery upto 30 L/min Comprehensive range of alarms Real time monitoring and multiple graphs Integrated SpO2 and FiO2 monitoring Integrated Humidification

Lumis 150 VPAP ST-A non-invasive ventilator Designed for non dependent patients with respiratory insufficiency or obstructive sleep apnea (OSA), Lumis 150 VPAP STA is non invasive ventilator with a set of fixed and adjustable alarms that deliver personalised ventilation. Featuring ResMed's unique volume assurance mode iVAPS (intelligent Volume Assured Presssure Support) Lumis 150 STA maintains target alveolar ventilation to suit each patient's changing needs. Together with an intelligent backup rate (iBR) and optional Auto EPAP, iVAPS continuously monitors ventilation and upper airway to help you further personalize therapy for your patients Key Features - iVAPS intelligent Backup Rate (iBR) AutoEPAP maintains upper airway patency Vsync TiControl 5 Trigger and Cycle Senstivities QuickNav for low touch therapy adjustments Climate Control Auto for automatic humidification Ramp and Rampdown for extra comfort supported by ResScan 5.4 Alarms for monitoring and confidence

AirCurve 10 V Auto The AirCurve 10 VAuto is an auto-adjusting bilevel machine that uses the comfort of both the AutoSet™ algorithm and Easy-Breathe waveform in its VAuto algorithm to treat obstructive sleep apnea patients who can benefit from greater pressure support. The AirCurve 10 VAuto adjusts the baseline pressure to hold the airway open while maintaining a fixed pressure support. Easy-Breathe technology The Easy-Breathe pressure waveform mimics the wave shape of normal breathing and replicates it for your breathing comfort. Climate Control Every device comes with the new HumidAir™ heated humidifier built-in, so you can enjoy the benefits of humidification in one easy-to-use system. And when used with the ClimateLineAir™ heated tube, your device has been designed to automatically deliver the optimal temperature and humidity, for a more comfortable therapy experience. Other features Continuous leak management enables reliable delivery of therapy pressure while maintaining patient-device synchrony. Compatible with up to 15 L/min of supplemental oxygen in S and CPAP mode and 4 L/min in VAuto mode. Consistent humidification throughout the night with the integrated HumidAir™ humidifier and optional ClimateLineAir™ heated tube with Climate Control technology can provide a more comfortable experience. The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner. The built-in ambient light sensor adjusts to the brightness of the room. So if you need to get up during the night, the screen’s back light won’t disrupt your bed partner. The light also turns off automatically, so you can settle back to sleep without disturbance.

Resmed Floton Auto CPAP with Best Fit 2 full Face Mask Floton APAP is compact, light and quiet APAP offering key features necessary treatment and comfort. Product Benefits Compact, Light and Quiet Automatic Positive Airway Pressure (APAP) treatment through most accurate pressure control which provides patient comfort Proprietary Expiratory Unloading Technique (EUT), equivalent to EPR, improves patient comfort by reducing expiratory pressure Floton Auto CPAP provides continuous positive airway pressure to the patient delivering optimal pressure breath by breath Key Feature EUT – Expiratory Unloading Technology, an exhalation relief function making breathing more comfortable and feel close to natural. Ramp time - When using the ramp function the pressure starts at 4cmH2O and rises until the device reaches the set PAP RAMP setting is between 0-60min and increase in pressure is 1 cm of water step per minute Advanced data recording - The Floton Auto will record up to 6 months of the following therapy information to the on-board memory. Auto On/off feature - The Auto On / Off feature allows the Floton Auto to detect when the mask is on and the user is breathing. The machine automatically begins providing the therapy air stream without having to press a button. This feature may be turned off if desired.

AirMini Travel Hard Case The AirMini™ Hard Travel Case by ResMed is a hard case for the AirMini™ travel CPAP machine. Made from impact absorbing EVA foam material, the AirMini™ Hard Travel Case is lightweight, water resistant and more! See below for more features: Impact Resistant Material for Travel Protection AirMini™ Hard Case uses EVA foam to snugly fit around the AirMini™ to assist in absorbing impact. Liquid Resistant for Additional Shielding The water and liquid resistant case help to keep the AirMini™ portable CPAP machine clean while enclosed. Easy to Handle for Convenience The AirMini™ Hard Travel Case offers a light and portable protective shell. It is designed with an easy-to-open zipper compartment.

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

Airfit F20 Frame SYS (M) The AirFit™ F20 Full Face CPAP Mask Assembly Kit is a refresh kit created to easily replace mask components to ensure the mask is clean and provides effective sleep apnea therapy. This assembly kit includes the AirFit F20 Mask Frame, Quick-Release Elbow, and AirFit F20 Full Face Cushion. This product does NOT include headgear. Multiple Sizes for the Best Possible Fit This AirFit™F20 Full Face Mask Assembly Kit is available in three sizes to provide the best fit possible. Available sizes include Small, Standard, and Large. Adaptive Cushion provides a Soft and Reliable Seal AirFit™ F20 Full Face CPAP Mask uses InfinitySeal™ technology to adapt and conform to the user’s face while providing a soft and comfortable feel. The InfinitySeal cushion uses various levels of thickness to allow the cushion to provide the right amount of pressure at the right places. Open Line of Vision with Below the Eyes Padded Frame The mask frame of the AirFit™ F20 Full Face Mask sits below the eye-line to provide an open line of vision. The AirFit F20 frame is added and flexible which allows the frame to conform to the users facial features nd flex with various sleeping positions. Quick-Release Elbow for Fast Tubing Removal Take the elbow and short tube off the AirFit™ F20 Full Face Mask with a squeeze on the Quick-Release elbow. Re-attach the tubing by slipping the Quick-Release Elbow with the tubing onto the mask until you hear a click. This product DOES NOT include Headgear. Headgear can be purchased through customization of the AirFit™ F20 Headgear or with the AirFit™ F20 Full Face CPAP Mask with Headgear.