ResMed Floton S25 is a non invasive ventilator which is compact comfortable and has continuous sync function. Featuring Adaptative Triggering Technology (ATT), which monitors each stage of the respiration cycle, Floton is designed to effortlessly synchronise with the natural breathing of a patient and reduce their work of breathing. ATT(Adaptive Triggering Technology) tracks every breath and monitors the different stages of the respiration cycle utilizing an Advanced Leak Calculation Algorithm that ensures reduced Work of Breathing (WOB) whilst providing the patient with effective and comfortable treatment. BiLevel ventilation with Spontaneous (S) mode up to 20 cmH2O Floton is the best BiLevel device with 5 modes of ventilation – S, T, ST, APCV, and CPAP, inspiration pressure from 4cm H2O to 33cm H2O Compact, Light and Quiet, the Floton BiLevel understands that every breath is different. Using advanced Adaptive Triggering Technology (ATT), Floton is designed to effortlessly synchronize with the natural breathing of the patient. Product Specifications and Features: Pressure range : 4cm H2O (0.4kPa) -20 cm H2O (2.0kPa) Pressure variance : ±0.4 cm H2O (0.04kPa) Water temperature : 44°C Maximum Relative humidity : 10% - 93%(non-condensing) Atmosphere pressure : 700hPa - 1060hPa

The ResMed H5i heated humidifier offers relief from dryness and congestion by integrating with the S9 CPAP. It doesn’t require any separate power supply, your existing S9 device will automatically detect as soon as the H5i is connected. H5i has added intelligence to help deliver constant humidity to minimize rain-out during standard humidification. It can be used with either the standard SlimLine tubing or with the recommended ClimateLine Heated tube. By using the ClimateLine Heated tube will optimize relative humidity and eliminate rain-out issues further. The H5i Heated Humidifier supports three modes: Patient: The more traditional humidifier mode will warm until it reaches the selected setting of humidity or 80%. Auto: When using ClimateLine heated tubing, the auto mode is recommended. This mode defaults to a Climate Control setting of 80° F. From there, you can adjust up and down as necessary. Off: The H5i can be set from OFF to 6 and is adjusted from the HOME screen. A humidity level setting of 3 is average. The higher the number, the more humidity is produced. Contents of the box: H5i Heated Humidifier with Climate Control Water Chamber

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

The HumidAir heated humidifier is part of ResMed's Climate Control solution for the AirSense 10 and AirCurve 10 series of devices. For a comfortable humidity level, add a HumidAir humidifier to your device. It is designed to seamlessly integrate with the device and offer relief from dryness and congestion. The HumidAir is incredibly simple to use. The device automatically detects when the HumidAir is connected. Once you have filled it with water and connected it, you are ready to go. The humidity level can be adjusted to suit your preference. Key features The HumidAir’s cleanable water tub is easy to disassemble, clean and reassemble. It can be washed on the top shelf of a dishwasher For extra comfort add a ClimateLineAir™ heated tube. If you continue to get a dry nose or mouth, or moisture in your mask, consider using a ClimateLineAir heated tube. The HumidAir humidifier eamed with the ClimateLineAir enables you to enjoy a flow of temperature controlled, moistened air all night long so you can experience the ultimate in therapy comfort —thanks to ResMed’s enhanced Climate Control system.

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

ClimateLine Family The ClimateLine tube enhances the H5i Humidifier by controlling the air temperature as it passes through the tube. By keeping the temperature in the tube steady, the Climate Control system automatically adjusts to changes in ambient conditions to maintain a comfortable humidity level. Rainout is avoided without needing to reduce the humidity delivered. A temperature sensor built into the mask end of the tube is automatically controlled by the Climate Control algorithm to deliver a consistent, comfortable temperature at the mask.

AirCurve 10 V Auto The AirCurve 10 VAuto is an auto-adjusting bilevel machine that uses the comfort of both the AutoSet™ algorithm and Easy-Breathe waveform in its VAuto algorithm to treat obstructive sleep apnea patients who can benefit from greater pressure support. The AirCurve 10 VAuto adjusts the baseline pressure to hold the airway open while maintaining a fixed pressure support. Easy-Breathe technology The Easy-Breathe pressure waveform mimics the wave shape of normal breathing and replicates it for your breathing comfort. Climate Control Every device comes with the new HumidAir™ heated humidifier built-in, so you can enjoy the benefits of humidification in one easy-to-use system. And when used with the ClimateLineAir™ heated tube, your device has been designed to automatically deliver the optimal temperature and humidity, for a more comfortable therapy experience. Other features Continuous leak management enables reliable delivery of therapy pressure while maintaining patient-device synchrony. Compatible with up to 15 L/min of supplemental oxygen in S and CPAP mode and 4 L/min in VAuto mode. Consistent humidification throughout the night with the integrated HumidAir™ humidifier and optional ClimateLineAir™ heated tube with Climate Control technology can provide a more comfortable experience. The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner. The built-in ambient light sensor adjusts to the brightness of the room. So if you need to get up during the night, the screen’s back light won’t disrupt your bed partner. The light also turns off automatically, so you can settle back to sleep without disturbance.