AcuCareTM F1-1 hospital non-vented full face mask with AAV AcuCare F1‐1 hospital non‐vented full face mask with anti‐asphyxia valve (AAV) is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key Features Non‐vented mask with a built‐in AAV for leak ventilation (single limb with an exhaust port). Color-coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Clear elbow indicates mask contains an AAV; to be used with a vented circuit. Blue dot indicates the mask is non‐vented. Single patient use for up to 7 days. Sizing template located on packaging for quick mask selection. Please note: This mask must be used with breathing circuits or positive pressure ventilation (PPV) devices that provide their own method of venting expired or supplemental gases.

AcuCareTM F1-0 hospital non-vented full face mask AcuCare F1‐0 hospital non‐vented full face mask is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key features Non‐vented mask for ventilators requiring a dual circuit, or single circuit, with integrated expiatory valve. Color‐coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Blue elbow indicates the mask is non‐vented without an anti‐asphyxia valve (AAV); to be used with a vented circuit. Single patient use for up to 7 days. Sizing template located on packaging for quick mask sizing identification. Please note: This mask must be used with breathing circuits or positive pressure ventilation (PPV) devices that provide their own method of venting expired or supplemental gases.

AcuCare F1-4 hospital vented full face mask AcuCare F1‐4 hospital vented full face mask is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key Features Vented mask with a built‐in AAV for leak ventilation (single limb). Colour‐coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Clear elbow indicates mask contains an anti‐asphyxia valve (AAV); can be used without a vented circuit. Uses ‘Full face’ mask setting in ResMed ventilators. Single patient use for up to 7 days. Sizing template located on packaging for quick mask selection.

Simplicity at your fingertips The Vivo 1 is a bi-level ventilator designed for personalized and comfortable non-invasive respiratory support for non-dependent patients with chronic breathing insufficiency. The intuitive interface ensures ease of use. A comprehensive set of modes and extensive monitoring capabilities, including EveryWare, allow for greater flexibility, making the ventilator a perfect choice for a variety of patients. COMPACT • One Platform − Three Models • Lightweight and Compact • Integrated Humidifier with heated wire circuit ADAPTABLE • Wide range of Modes • Adult and paediatric (>10 kg) • Intuitive Interface • Extensive therapy data • Suitable for use in hospital and home • Closer monitoring with Breas accessory box CONNECTED Making Connected Care more insightful • EveryWare − Secure cloud-based remote connectivity solution • PC Software – Desktop-based with Live Viewer INTENDED USE: Vivo 1 is intended to provide non-invasive ventilation for patients weighing over 10 kg (22 lbs) who require long-term support or mechanical ventilation for respiratory impairment, with or without obstructive sleep apnea. Vivo 1 is intended for spontaneously breathing patients.

The ResMed H5i heated humidifier offers relief from dryness and congestion by integrating with the S9 CPAP. It doesn’t require any separate power supply, your existing S9 device will automatically detect as soon as the H5i is connected. H5i has added intelligence to help deliver constant humidity to minimize rain-out during standard humidification. It can be used with either the standard SlimLine tubing or with the recommended ClimateLine Heated tube. By using the ClimateLine Heated tube will optimize relative humidity and eliminate rain-out issues further. The H5i Heated Humidifier supports three modes: Patient: The more traditional humidifier mode will warm until it reaches the selected setting of humidity or 80%. Auto: When using ClimateLine heated tubing, the auto mode is recommended. This mode defaults to a Climate Control setting of 80° F. From there, you can adjust up and down as necessary. Off: The H5i can be set from OFF to 6 and is adjusted from the HOME screen. A humidity level setting of 3 is average. The higher the number, the more humidity is produced. Contents of the box: H5i Heated Humidifier with Climate Control Water Chamber

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

SlimLineTM Tubing The SlimLine tube is 40% lighter, 20% thinner and takes up 35% less space than traditional tubing. It’s the slimmest, most flexible tube on the market. Key features The streamlined design of the tube makes it easier for patients to move around in bed without pulling on the mask, so their mask and seal stay stable. Handy smart-fit cuff design makes it simpler to attach and remove. Travel-friendly tube for use at home, in hospital or while traveling.

Astral 150 non-invasive ventilator ResMed's Astral 150 life support ventilator offers excellence in invasive and non invasive ventilation without compromise. From initial setup to everyday use, Astral offers greater freedom, confident care and designed efficiency to enrich life for you and your patients. Astral's discreet and lighweight design coupled with 24 hour run time (with combination of internal and external batteries) provides greater freedom and makes patient transfers easier. It delivers excellence in leak and valve ventilation for invasive and non invasive applications as well as providing a full suite of therapy modes to suit adult and peadiatric applications. With easy setup, simple servicing and an intuitive interface, Astral is designed to make ventilation support straightforward and efficient Key Features - Invasive and non invasive, adult to peadiatric usage In built battery back up of upto 8 hours, which can be extended upto 24 hours with external battery pack 4 customizable pre set programs Single limb circuit with leak and valve ventilation Dual limb circuit Apnoea Ventilation Manual breath Sigh Breath Optional SpO2 monitoring FiO2 monitoring 7 days of high resolution data with 25Hz pressure and flow 365 days of summary data Wide range of settable alarms, including SpO2 and FiO2, when connected