Resmed Air10 90W CPAP BIPAP Power Supply Adapter Resmed Air10 90W CPAP BIPAP Power Supply Adapter can be used to connect Airsense 10 series devices that are being used with a Heated Humidifier to the main electricity supply. A smaller, lighter 30W Power Supply is available for machines without Humidifier. Compatible with all AirSense, AirStart, and AirCurve machines: AirSense 10 CPAP AirSense 10 Elite AirSense 10 AutoSet AirSense 10 AutoSet for Her AirCurve™ 10 VAuto with Heated Humidifier AirCurve 10 VPAP S with Heated Humidifier AirStart CPAP AirStart Auto CPAP

AcuCareTM F1-1 hospital non-vented full face mask with AAV AcuCare F1‐1 hospital non‐vented full face mask with anti‐asphyxia valve (AAV) is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key Features Non‐vented mask with a built‐in AAV for leak ventilation (single limb with an exhaust port). Color-coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Clear elbow indicates mask contains an AAV; to be used with a vented circuit. Blue dot indicates the mask is non‐vented. Single patient use for up to 7 days. Sizing template located on packaging for quick mask selection. Please note: This mask must be used with breathing circuits or positive pressure ventilation (PPV) devices that provide their own method of venting expired or supplemental gases.

AcuCareTM F1-0 hospital non-vented full face mask AcuCare F1‐0 hospital non‐vented full face mask is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key features Non‐vented mask for ventilators requiring a dual circuit, or single circuit, with integrated expiatory valve. Color‐coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Blue elbow indicates the mask is non‐vented without an anti‐asphyxia valve (AAV); to be used with a vented circuit. Single patient use for up to 7 days. Sizing template located on packaging for quick mask sizing identification. Please note: This mask must be used with breathing circuits or positive pressure ventilation (PPV) devices that provide their own method of venting expired or supplemental gases.

AcuCare F1-4 hospital vented full face mask AcuCare F1‐4 hospital vented full face mask is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key Features Vented mask with a built‐in AAV for leak ventilation (single limb). Colour‐coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Clear elbow indicates mask contains an anti‐asphyxia valve (AAV); can be used without a vented circuit. Uses ‘Full face’ mask setting in ResMed ventilators. Single patient use for up to 7 days. Sizing template located on packaging for quick mask selection.

The ResMed H5i heated humidifier offers relief from dryness and congestion by integrating with the S9 CPAP. It doesn’t require any separate power supply, your existing S9 device will automatically detect as soon as the H5i is connected. H5i has added intelligence to help deliver constant humidity to minimize rain-out during standard humidification. It can be used with either the standard SlimLine tubing or with the recommended ClimateLine Heated tube. By using the ClimateLine Heated tube will optimize relative humidity and eliminate rain-out issues further. The H5i Heated Humidifier supports three modes: Patient: The more traditional humidifier mode will warm until it reaches the selected setting of humidity or 80%. Auto: When using ClimateLine heated tubing, the auto mode is recommended. This mode defaults to a Climate Control setting of 80° F. From there, you can adjust up and down as necessary. Off: The H5i can be set from OFF to 6 and is adjusted from the HOME screen. A humidity level setting of 3 is average. The higher the number, the more humidity is produced. Contents of the box: H5i Heated Humidifier with Climate Control Water Chamber

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

HumidX™ waterless humidification - Humidification, but not as you know it HumidX and HumidX Plus take portable humidification to whole new level.* Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide a comfortable therapy experience for patients at home, or while they’re way. HumidX ResMed’s standard waterless humidification system for most climates and sleep environments. HumidX Plus Humidification system optimised for dry and high altitude environments where humidity levels are low, e.g., aircraft. How HumidX works When you exhale, heat and moisture is captured and stored within the HME’s tiny paper ridges. When you inhale, this heat and moisture is released to humidify the air you breathe in. HumidX and HumidX Plus features Small, lightweight and easy to use No washing required Available in 3 pack or 6 pack sets Usable for up to 30 days after opening * HumidX and HumidX Plus are only compatible with AirFit N20 masks and AirFit P10 for AirMini.

Filter for S9 / AirSense Proper air filtration starts with an air filter on the CPAP machine by catching dust, animal hair and pet dander. Most CPAP machines include a standard disposable filter which should be changed when dirty or after a month. These Disposable Filters fit the ResMed S9™ Series and AirSense™ 10 CPAP Machines. (3PC / Pack)

Replacement power supply unit plus power cord for the ResMed S9 series of CPAP machines. This product includes the cable adapter. Specifications 90 Watt Dimensions: 5 1/2" (L) x 1 7/8" (W) x 1 1/4" (D)