tandard, universal tubing with an inner diameter of 19 mm. Please check your therapy device user guide for device-specific tubing recommendations and requirements. Simple: standard, universal tubing with an inner diameter of 19 mm. Adaptable: compatible with devices from the ResMed S8™ and previous series, as well as with compatible devices from other manufacturers. 2m

The ResMed H5i heated humidifier offers relief from dryness and congestion by integrating with the S9 CPAP. It doesn’t require any separate power supply, your existing S9 device will automatically detect as soon as the H5i is connected. H5i has added intelligence to help deliver constant humidity to minimize rain-out during standard humidification. It can be used with either the standard SlimLine tubing or with the recommended ClimateLine Heated tube. By using the ClimateLine Heated tube will optimize relative humidity and eliminate rain-out issues further. The H5i Heated Humidifier supports three modes: Patient: The more traditional humidifier mode will warm until it reaches the selected setting of humidity or 80%. Auto: When using ClimateLine heated tubing, the auto mode is recommended. This mode defaults to a Climate Control setting of 80° F. From there, you can adjust up and down as necessary. Off: The H5i can be set from OFF to 6 and is adjusted from the HOME screen. A humidity level setting of 3 is average. The higher the number, the more humidity is produced. Contents of the box: H5i Heated Humidifier with Climate Control Water Chamber

SlimLineTM Tubing The SlimLine tube is 40% lighter, 20% thinner and takes up 35% less space than traditional tubing. It’s the slimmest, most flexible tube on the market. Key features The streamlined design of the tube makes it easier for patients to move around in bed without pulling on the mask, so their mask and seal stay stable. Handy smart-fit cuff design makes it simpler to attach and remove. Travel-friendly tube for use at home, in hospital or while traveling.

Resmed AirFit P30i Nasal Pillow Mask (STD) The ResMed AirFit P30i pillows mask features a top-of-the-head tube design and pillows cushion that makes it easier to sleep in many different positions! Enjoy the freedom to move in your sleep and get closer to your bed partner. Recommended sizing: small starter pack for females and standard starter pack for males.

AcuCareTM F1-1 hospital non-vented full face mask with AAV AcuCare F1‐1 hospital non‐vented full face mask with anti‐asphyxia valve (AAV) is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key Features Non‐vented mask with a built‐in AAV for leak ventilation (single limb with an exhaust port). Color-coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Clear elbow indicates mask contains an AAV; to be used with a vented circuit. Blue dot indicates the mask is non‐vented. Single patient use for up to 7 days. Sizing template located on packaging for quick mask selection. Please note: This mask must be used with breathing circuits or positive pressure ventilation (PPV) devices that provide their own method of venting expired or supplemental gases.

AcuCareTM F1-0 hospital non-vented full face mask AcuCare F1‐0 hospital non‐vented full face mask is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key features Non‐vented mask for ventilators requiring a dual circuit, or single circuit, with integrated expiatory valve. Color‐coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Blue elbow indicates the mask is non‐vented without an anti‐asphyxia valve (AAV); to be used with a vented circuit. Single patient use for up to 7 days. Sizing template located on packaging for quick mask sizing identification. Please note: This mask must be used with breathing circuits or positive pressure ventilation (PPV) devices that provide their own method of venting expired or supplemental gases.

AcuCare F1-4 hospital vented full face mask AcuCare F1‐4 hospital vented full face mask is part of ResMed’s range of high‐quality disposable patient interfaces for the hospital. Key Features Vented mask with a built‐in AAV for leak ventilation (single limb). Colour‐coded, easily identifiable, and designed to fit with common breathing circuits used in hospitals around the world. Clear elbow indicates mask contains an anti‐asphyxia valve (AAV); can be used without a vented circuit. Uses ‘Full face’ mask setting in ResMed ventilators. Single patient use for up to 7 days. Sizing template located on packaging for quick mask selection.

Astral 150 non-invasive ventilator ResMed's Astral 150 life support ventilator offers excellence in invasive and non invasive ventilation without compromise. From initial setup to everyday use, Astral offers greater freedom, confident care and designed efficiency to enrich life for you and your patients. Astral's discreet and lighweight design coupled with 24 hour run time (with combination of internal and external batteries) provides greater freedom and makes patient transfers easier. It delivers excellence in leak and valve ventilation for invasive and non invasive applications as well as providing a full suite of therapy modes to suit adult and peadiatric applications. With easy setup, simple servicing and an intuitive interface, Astral is designed to make ventilation support straightforward and efficient Key Features - Invasive and non invasive, adult to peadiatric usage In built battery back up of upto 8 hours, which can be extended upto 24 hours with external battery pack 4 customizable pre set programs Single limb circuit with leak and valve ventilation Dual limb circuit Apnoea Ventilation Manual breath Sigh Breath Optional SpO2 monitoring FiO2 monitoring 7 days of high resolution data with 25Hz pressure and flow 365 days of summary data Wide range of settable alarms, including SpO2 and FiO2, when connected

Stellar 150 non-invasive ventilator Stellar 150 is ResMed's premium non invasive ventilator (with invasive capabilities) for patients with changing ventilatory needs or progressive respiratory conditions, including chronic obstructive pulmonary disease (COPD), neuromuscular disease (NMD) and obesity hypoventilation syndrome (OHS). Easy to set up and use, Stellar 150 carefully strikes a balance between providing clinicians with pre programmed settings that make their job easier, and the opportunity to fine-tune settings when needed to suit each individual patient - a versatile system with its end user in mind. With intelligent backup rate and optional AutoEPAP feature, iVAPS in Stellar 150 continuously monitors ventilation and the upper airway and automatically adjusts to deliver personalised ventilation that accomodates each patient's changing needs Key Features - iVAPS AutoEPAP maintains upper airway patency intelligent Backup Rate (iBR) Pathology defaults for obstructive, restrictive, obesity hypoventilation and normal lung mechanics Invasive and non invasive, adult to peadiatric usage In built battery back up upto 2 hours 2 customizable pre set programs Vsync TiControl 5 Trigger and Cycle Senstivities Oxygen delivery upto 30 L/min Comprehensive range of alarms Real time monitoring and multiple graphs Integrated SpO2 and FiO2 monitoring Integrated Humidification